Flowfinds Solutions Kft.
Every kit is individually tested, compatibility-verified, warranty-backed, and typically priced below comparable branded alternatives.
Verified before shipment. Guaranteed before installation. The fulfilment promise
Sixteen memory lines, three NVMe lines, specified to the bin.
Every figure on this site is a supplier specification or a bench result — never a guess.
Memory
64, 96 and 128 GB kits lead the range, 32 GB below them, 8 and 16 GB for replacements, and 192 and 256 GB for professional builds after platform verification. DDR4-2400 to DDR4-3600, DDR5-4800 to DDR5-6000, DIMM and SODIMM.
From €39 · up to 6000 MT/s
Storage
M.2 2280, PCIe 4.0 ×4 and 5.0 ×4, 3D TLC. 7,400 MB/s at the Gen4 link ceiling, 10,000 MB/s on Gen5.
From €89 · PCIe 4.0 & 5.0
Check compatibility · Which memory do I need? · Compare kits
Why now
96, 128, 192 and 256 GB kits have seen consistent inflation from brand-name suppliers — the capacities where workstations and AI systems start demanding real investment. Availability from manufacturer-direct sourcing brings those prices back to earth. If you have been watching inventory disappear and margins climb, the platform verification step below exists exactly for these builds.
Start with capacity
Choose the platform first — DDR4 or DDR5 — then the line. 96 and 128 GB are two-module DDR5 kits that state their rated bin directly. 32 GB is the step below 64; 8 and 16 GB are stocked as replacements, not as the basis of a new build.
Professional — compatibility verification required
Up to DDR5-6000 on validated systems. Enter your motherboard and CPU to see the configuration Flowfinds guarantees for your system. Four populated DIMM slots load the memory controller far harder than two, so we verify the platform before we state a speed — and each capacity ships as a separate AMD EXPO and Intel XMP revision.
The lineup
Sixteen memory lines and three NVMe lines. Capacity, rank configuration and speed bin differ line to line, and the product pages say which — including where the supplier does not publish a figure. Every price includes EU & UK shipping.
Memory
Five DDR4 and eleven DDR5 lines. JEDEC-SPD modules that boot on any board, XMP/EXPO bins above the JEDEC ceiling, high-capacity dual-rank, one 262-pin SODIMM, and the four-DIMM professional kits listed above.
Storage
M.2 2280, single-sided, PCIe ×4. Two Gen4 drives at the link ceiling, one Gen5 that needs its heatsink.
Engineering
Bought from the factories that assemble the modules, not through distribution. That is why the pages name the speed bin and the die configuration where they can, and say so where the supplier does not publish it.
Each kit is tested before it ships. What arrives is what was verified.
Two years on the standard range, and a limited lifetime warranty on the DDR5 Pro high-capacity kits from the date of purchase. Handled directly by Flowfinds Solutions Kft. Statutory EU and UK consumer rights apply on top and are not limited by the warranty.
A 32 GB kit as 2×16 populates both channels: 51.2 GB/s at DDR4-3200 against 25.6 GB/s from one 32 GB module. Same capacity, half the bandwidth. Read the configuration before the capacity.
DDR4 and DDR5 differ in key notch position, pin count and voltage regulation — a DDR5 DIMM will not seat in a DDR4 slot and would not work if it did. Every board takes exactly one generation. The checker gives a straight answer.
CAS latency, rank configuration and NVMe controller part numbers are not published for every line we carry. Where that happens we give the JEDEC baseline or the range for the class and say plainly that the supplier publishes no figure. An invented number is worse than an honest range.
Every module is seated, POSTed and pattern-tested before it goes in a box. The unit that ships is the unit that passed.
Compatibility
The one question that matters before you order memory. Select your CPU platform or type your board model and get a straight answer for every kit — including the ones that will not fit.
Research
Speed bin, rank configuration, module height, link generation. Four numbers decide whether a part works in your machine, and none of them are on the box.
Specs
Capacity, speed bin, voltage, platform fit and module height for every line, side by side.
Tracked shipping to both markets, included in the price. Volume pricing for system builders and resellers on request.